PolymersAbstract: The development of parameters for a certain additive technology is the key to increase the number of materials that are processed as well as the applications. This chapter shows the details...
Tech Library
Polymers
Search the Tech Library by keyword or browse a specific category below.
Additive Manufacturing
Aerogel
Application Highlight
Automotive
Battery
Bio-Based Insulation
Blending
Brochure
Building Materials
Ceramics
Composites
Dielectric
Effusivity
Electronics
Emissivity
Energy Storage
Explosives
Fiber/Fibre
Flex Transient Plane Source
Foams
Geology
Graphene
Heat Transfer Fluids
Insulation
Liquids
Metals
Modified Transient Plane Source (MTPS) Method
Nanomaterials
Oil and Gas
Optics
Paste
Phase Change Materials
Photovoltaic
Plastics
Polymers
Potting Compounds
Powders
Semiconductor
TAL
Textiles
Thermal Conductivity
Thermal Interface Materials
Thermal Management Systems
Thermal Radiation
Thermoelectrics
Thin Films
Transient Line Source (TLS) Method
Development of Material and Processing Parameters for AM
Iron Oxide and Tungsten Trioxide Nanofluids to Enhance Automotive Cooling Radiators: Experimental Analysis
Abstract: The current cooling systems of internal combustion engine vehicles have several functions; in addition to removing excess heat from the engine, it plays an essential role in ensuring that...
Foamed Geopolymer with Customized Pore Structure
Abstract: Due to their favorable production conditions and promising properties (e.g., low shrinkage after foaming, mechanical and chemical stability, high-temperature resistance), geopolymer foams...
Mechanical and physical characteristics of alkali- activated mortars incorporated with recycled polyvinyl chloride and rubber aggregates
Abstract: One of the ways to achieving net-zero concept in the construction industry is to use alternatives to Portland cement (OPC) and virgin aggregates for concrete manufacturing. Recycled rubber...
Pickering emulsion of cellulose nanofibrils stabilized phase change materials for thermal management applications
Abstract: Phase change materials (PCM) has been increasingly used over the past decades to combat the large amount of energy needed for thermal comfort of human beings. Organic PCM is desired in...
Ceramic Precursor-Phthalonitrile Hybrid with Improved High Heat Resistance through Constructing Binary Continuous Phases
Abstract: Achieving organic-inorganic hybrids with improved heat resistance above 500 oC using inorganic materials as filler remains a challenge because inorganic constitutes could not form...
Surface modification of MWCNT to improve the mechanical and Thermal properties of natural rubber nanocomposites
Abstract: In this study, we focused on the synergistic effect between carbon black (CB) and multiwall carbon nanotube (MWCNT) hybrid fillers. In particular, the surface modification of pristine MWCNT...
Study on the Effect of NTO on the Performance of HMX-Based Aluminized Cast-PBX
Abstract: 3-Nitro−1,2,4-triazol−5-one (NTO) is an explosive with broad application prospects. To study the effect of NTO content on the properties of HMX-based cast-PBX (polymer bonded...
Ice-Template Crosslinked PVA Aerogels Modified with Tannic Acid and Sodium Alginate
Abstract: With the commitment to reducing environmental impact, bio-based and biodegradable aerogels may be one approach when looking for greener solutions with similar attributes to current...