Trident™ Thermal Conductivity Application Highlight: Pyrolytic Graphite Foils and TPS
The following application highlight addresses the in-plane thermal conductivity of the Pyrolytic Graphite Foils (900-1800 W/mK), characterized using the C-Therm TPS Module with the Slab...
Comparison of Phase Change Materials of Modified Soy Wax using Graphene and MAXene for Thermal Energy Storage Materials in Buildings
This study aimed to characterize Phase Change Materials (PCM) by improving their properties using shape stabilization; this was achieved by adding nanoparticles as a support material. PCM soy wax was...
Trident™ Thermal Conductivity Application Highlight: Potting and Impregnation Materials
The following Application Highlight addresses the measurement of materials used for potting and impregnation applications using the Modified Transient Plane Source (MTPS) method.
Potting and...
Trident™ Thermal Conductivity Application Highlight: Thermal Mapping and Filler Settling Detection in Polymer Composites With MTPS
The following Application Highlight features the use of the Modified Transient Plane Source method as a qualitative screening tool for the detection of filler dispersion uniformity in polymer...
Trident™ Thermal Conductivity Application Highlight: Monitoring Resin Stability and Sedimentation with MTPS
The following Application Highlight summarizes the use of C-Therm’s MTPS method in monitoring the stability of a filled resin system.
Thermally conductive adhesives are a key component for...
Thermal enhancement of graphene dispersed emulsifier cutting fluid with different surfactants
Abstract: Emulsifier cutting fluids like soluble oil, due to their excellent cooling and lubricating properties, are extensively used in industries during manufacturing processes. But they are...
Experimental Investigations and Analytical Models of Water-Magnetite (Fe3O4) Nanofluids for Polymer Electrolyte Membrane (PEM) Fuel Cell Cooling Application
Abstract: Water magnetite nanofluids for Polymer Electrolyte Membrane (PEM) fuel cell cooling application have been investigated. Nanofluid of water-magnetite (Fe3O4) has been synthesized using a...
Reduced Graphene Oxide Composite Nanowood for Solar-Driven Interfacial Evaporation and Electricity Generation
Abstract: Solar-driven interfacial evaporation (SDIE) is considered one of the most promising technological approaches to solve the freshwater shortages. Based on renewable wood, we fabricated the...
Thermal and Tribological Properties Enhancement of PVE Lubricant Modified with SiO2 and TiO2 Nanoparticles Additive
Abstract: The addition of nanoparticles may have a positive or negative impact on the thermal and tribological properties of base lubricant. The objective of this paper is to investigate the effect...