Trident™ Application Highlight: Thermal Conductivity of Pressure-Sensitive Adhesives for EV Systems
This document highlights the use of the C-Therm's Transient Plane Source (TPS) Thin Films Utility to characterize thin acrylic pressure-sensitive adhesive films for EV battery module thermal...
Trident™ Thermal Conductivity Application Highlight: Characterization of a Battery Pouch’s Anisotropic Thermal Conductivity
This Application Highlight illustrates C-Therm’s FLEX Transient Plane Source (TPS) system being utilized to investigate the anisotropic thermal conductivities of a lithium pouch battery cell using...
Trident™ Application Highlight: Thermal Conductivity and Effusivity of EV Car Seat Materials
This document highlights the use of the Modified Transient Plane Source (MTPS) method for characterizing the thermal conductivity and thermal effusivity of foam, insulation, and fabric materials used...
Trident™ Application Highlight: Representative Thermal Conductivity Data for EV Thermal Simulation
This document highlights the use of the Modified Transient Plane Source (MTPS) and Transient Plane Source (TPS) methods for measuring materials for thermal simulation modelling of electric...
Trident™ Application Highlight: Thermal Conductivity Characterization Under Vacuum Conditions
This document highlights the use of the Modified Transient Plane Source (MTPS) method to characterize the thermal conductivity of insulation materials under vacuum conditions.
In aerospace,...
Trident™ Thermal Conductivity Application Highlight: Characterizing e-Liquids
This application highlight addresses the measurement of e-liquids for use in e-cigarettes using the Transient Hot Wire (THW).
In the design and performance of e-cigarettes (vapes), the thermal...
Geothermal Exploration Through Deep Exploratory Slimholes: Singapore’s Perspective
This article reports on exploring possible geothermal energy sources for Singapore. Here the authors explore two borehole drilling locations for possible optimal locations and run tests on samples...
In-Line Quality Assurance of Sediment Detection in 2K Polymer Adhesives with Thermal Effusivity Sensors in Dispensing Equipment
In automotive electronics production, a wide portfolio of polymer materials is used for different applications, depending on their use case.
These applications are mainly separated into gluing and...
Trident™ Application Highlight: Impact of Saturation on the Thermal Conductivity of Subsurface Geomaterials
This document highlights the use of the Transient Plane Source (TPS) method to characterize the thermal conductivity of sandstone and shale core samples at varying saturation levels, in accordance...