PolymersAbstract Thermoforming process of thermoplastic-based continuous CFRP’s offer a major advantage in reducing cycle times for large-scale productions, but it can also have a significant impact on the...
Tech Library
Polymers
Search the Tech Library by keyword or browse a specific category below.
Additive Manufacturing
Aerogel
Application Highlight
Automotive
Battery
Bio-Based Insulation
Blending
Brochure
Building Materials
Ceramics
Composites
Dielectric
Effusivity
Electronics
Emissivity
Energy Storage
Explosives
Fiber/Fibre
Flex Transient Plane Source
Foams
Geology
Graphene
Heat Transfer Fluids
Insulation
Liquids
Metals
Modified Transient Plane Source (MTPS) Method
Nanomaterials
Oil and Gas
Optics
Paste
Phase Change Materials
Photovoltaic
Plastics
Polymers
Potting Compounds
Powders
Semiconductor
TAL
Textiles
Thermal Conductivity
Thermal Interface Materials
Thermal Management Systems
Thermal Radiation
Thermoelectrics
Thin Films
Transient Line Source (TLS) Method
Thermoforming process effects on structural performance of carbon fiber reinforced thermoplastic composite parts through a manufacturing to response pathway
Photothermally Enabled Mxene Hydrogel Membrane With Integrated Solar-Driven Evaporation And Photodegradation For Efficient Water Purification
Abstract: Sustainable and energy-efficient water purification making use of solar energy is highly desirable to address water scarcity and pollution crisis. However, it remains a challenge to achieve...
Micro-cavity perfect blackbody composite with good heat transfer towards a flat-plate reference radiation source for thermal imagers
One of the key measures to secure reliable fever screening is to calibrate a thermal imager with an accurate flat-plate blackbody device in real time. We provide durable perfect blackbody plates with...
Improved Potting of Litz Wires for High Power Density Electric Motor
Specific details including selections of process materials, tooling/fixture setups, and a stepby-step procedure for scaling-up demonstrations of the newly developed potting process, namely...
Simulation Led Performance Evaluation and Design of Polymer Composite for Encapsulation of Low-Concentration Photovoltaic Modules
This work is focused on optimizing the properties of encapsulant for low-concentration photovoltaic (LCPV) modules leading to improved electrical power and module life. Thermal conductivity (TC),...
Enhanced thermally conductive and thermomechanical properties of polymethyl methacrylate (PMMA)/graphene nanoplatelets (GNPs) nanocomposites for radiator of electronic components
In this work, multi-layer hot pressing (MLHP) method was used to prepare the graphene nanoplatelets (GNPs) filled polymethyl methacrylate (PMMA) composites. Effect of GNP content on the viscoelastic...
Innervated, Self-Sensing Liquid Crystal Elastomer Actuators with Closed Loop Control
The programmable assembly of innervated LCE actuators (iLCEs) with prescribed contractile actuation, self-sensing, and closed loop control via core–shell 3D printing is reported. This...
Natural rubber nanocomposites: effect of carbon black/multi-walled carbon nanotubes hybrid fillers on the mechanical properties and thermal conductivity
This work presents the effect of carbon black (CB)/multiwall carbon nanotubes (MWCNT) hybridfiller system on the mechanical properties and thermal conductivity of natural rubber (NR) based...
Influence of filler hybridization on thermomechanical properties of hemp/silver epoxy composite
The polymer composite material’s thermomechanical properties with fiber as reinforcement material have been widely studied in the last few decades. However, these fiber-based polymer composites...