Trident™ Thermal Conductivity Application Highlight: Monitoring Resin Stability and Sedimentation with MTPS
The following Application Highlight summarizes the use of C-Therm’s MTPS method in monitoring the stability of a filled resin system.
Thermally conductive adhesives are a key component for...
Trident™ Thermal Conductivity Application Highlight: Characterizing Performance of a Thermal Adhesive for EV Battery Packs
The following Application Highlight addresses the measurement of both an uncured and cured thermal adhesive material using the Modified Transient Plane Source (MTPS) method in collaboration with HB...
Trident™ Thermal Conductivity Application Highlight: Characterizing Thermal Performance of Self-Adhesive Tapes for EV Battery Applications
The following Application Highlight addresses the measurement of self-adhesive tapes using the Modified Transient Plane Source (MTPS) method in collaboration with tesa tapes.
Pressure sensitive...
Trident™ Thermal Conductivity Application Highlight: Measuring Thermal Conductivity of Thermal Interface Materials with MTPS
The following Application Highlight features the use of the Modified Transient Plane Source method in the thermal conductivity testing of thermal interface materials (TIMs).
TIMs are employed as a...
Evaluation of physicochemical properties on the blending process of pharmaceutical granules with magnesium stearate by thermal effusivity sensor
Magnesium Stearate (MgSt) is a widely used lubricant for preventing tablet compression trouble. It is known that the powder characteristic of MgSt is different among MgSts manufactured by different...
Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand
Abstract: Polyvinyl chloride plastic (PVC) and glass waste have proven to be significant environmental concerns considering their restricted reuse and complicated recycling procedures. Glass and PVC...
An Experimental Study on Thermophysical Parameters of Production Wells and their Applications
Abstract: Transient pressure and temperature behavior in a wellbore develops as hot fluids from the reservoir move upward, exchanging heat with the surrounding formation. Because of heat exchange...
Reusing of Oil Industry Waste as Secondary Material in Clay Bricks
Abstract: In this study, various oil industrial wastes such as spent filtration earth (SFE), spent bleaching earth (SBE), sludge from oil refining industry (SOI) or sludge from pomace oil extraction...
Development of composite adsorbents and storage vessels for domestically used adsorbed natural gas
Abstract: Experiments were designed to develop an adsorbed natural gas (ANG) technique suitable for household environment. The composite adsorbent was synthesized based on four key factors in terms...