Trident™ Application Highlight: Monitoring Resin Stability and Filler Sedimentation with MTPS
This document highlights the use of the Modified Transient Plane Source (MTPS) method for monitoring filler sedimentation in thermally conductive resin systems, demonstrating real-time detection of...
Trident™ Application Highlight: Accelerated Performance Validation of Thermal Adhesives for EV Battery Packs
This document highlights the use of the Modified Transient Plane Source (MTPS) method in the measurement of uncured and cured thermal interface materials during R&D formulation development.
HB...
Trident™ Application Highlight: Thermal Conductivity of Self-Adhesive Tapes for EV Applications Using MTPS
The following Application Highlight addresses the measurement of self-adhesive tapes using the Modified Transient Plane Source (MTPS) method in collaboration with tesa tapes.
Pressure sensitive...
Trident™ Application Highlight: Thermal Conductivity of Thermal Interface Materials Measured with MTPS
This document highlights the use of the Modified Transient Plane Source (MTPS) method for characterizing the thermal conductivity of thermal interface materials (TIMs), including gap pads and potting...
Evaluation of physicochemical properties on the blending process of pharmaceutical granules with magnesium stearate by thermal effusivity sensor
Magnesium Stearate (MgSt) is a widely used lubricant for preventing tablet compression trouble. It is known that the powder characteristic of MgSt is different among MgSts manufactured by different...
Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand
Abstract: Polyvinyl chloride plastic (PVC) and glass waste have proven to be significant environmental concerns considering their restricted reuse and complicated recycling procedures. Glass and PVC...
An Experimental Study on Thermophysical Parameters of Production Wells and their Applications
Abstract: Transient pressure and temperature behavior in a wellbore develops as hot fluids from the reservoir move upward, exchanging heat with the surrounding formation. Because of heat exchange...
Reusing of Oil Industry Waste as Secondary Material in Clay Bricks
Abstract: In this study, various oil industrial wastes such as spent filtration earth (SFE), spent bleaching earth (SBE), sludge from oil refining industry (SOI) or sludge from pomace oil extraction...
Development of composite adsorbents and storage vessels for domestically used adsorbed natural gas
Abstract: Experiments were designed to develop an adsorbed natural gas (ANG) technique suitable for household environment. The composite adsorbent was synthesized based on four key factors in terms...