Trident™ Thermal Conductivity Application Highlight: 60 mm TPS Sensor Recommended for Testing Large Heterogenous Concrete Samples
This Application Highlight addresses the testing of concrete using the C-Therm Trident™. This document highlights the benefits of testing heterogeneous samples with the 60mm TPS.
Concrete is...
Trident™ Thermal Conductivity Application Highlight: Testing Granular Materials Using the TLS Needle Probe
The following Application Highlight features the use of the Transient Line Source method in the thermal conductivity testing of granular materials.
Granular materials (such as polymeric pellets,...
Trident™ Thermal Conductivity Application Highlight: Testing Concrete with FLEX TPS
The following Application Highlight addresses testing of concrete using the C-Therm Trident™. The document highlights the use of bulk thermal conductivity testing on porous samples with the...
Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand
Abstract: Polyvinyl chloride plastic (PVC) and glass waste have proven to be significant environmental concerns considering their restricted reuse and complicated recycling procedures. Glass and PVC...
An Experimental Study on Thermophysical Parameters of Production Wells and their Applications
Abstract: Transient pressure and temperature behavior in a wellbore develops as hot fluids from the reservoir move upward, exchanging heat with the surrounding formation. Because of heat exchange...
Experimental investigation of the effect of thermal cycling on the thermomechanical properties of three rock varieties for high temperature thermal energy storage
Abstract: During the past years "rock batteries" have become increasingly relevant for the storage of renewable energy sources, such as wind and solar energy, because of their economic and ecological...
Evaluating thermal conductivity of desert sand under different initial physical properties
Abstract: Analyzing the thermal conductivity of soil as a function of other parameters is necessary to understand the flow of heat around earth-to-water heat exchanger. Thermal conductivity depends...
Results from the GeoERA MUSE shallow geothermal project – UK Cardiff pilot area
Abstract: Shallow geothermal energy systems deployment will play an important part in decarbonisation of heating and cooling of buildings. This trend will stimulate research into ground physical,...
High frictional stability of braking material reinforced by Basalt fibers
Abstract: Frictional stability is a more accurate description of the friction state than coefficient of friction (COF) and wear rate. This work aims to develop basalt fiber (BF)-reinforced braking...