Development of Material and Processing Parameters for AM
Abstract: The development of parameters for a certain additive technology is the key to increase the number of materials that are processed as well as the applications. This chapter shows the details...
Iron Oxide and Tungsten Trioxide Nanofluids to Enhance Automotive Cooling Radiators: Experimental Analysis
Abstract: The current cooling systems of internal combustion engine vehicles have several functions; in addition to removing excess heat from the engine, it plays an essential role in ensuring that...
Novel 3D Thermal Energy Storage Materials Based on Highly Porous Patterned Printed Clay Supports Infiltrated With Molten Nitrate Salts
Abstract: One of the main drawbacks of phase change materials (PCM) to be employed as thermal energy storage (TES) systems in energy applications, such as concentrated solar power (CSP), is...
Mechanical and physical characteristics of alkali- activated mortars incorporated with recycled polyvinyl chloride and rubber aggregates
Abstract: One of the ways to achieving net-zero concept in the construction industry is to use alternatives to Portland cement (OPC) and virgin aggregates for concrete manufacturing. Recycled rubber...
Selection and synthesis of thermal energy storage PCM with silicon carbide for biomedical applications
Abstract: Energy storage requirement is increasing day by day for all of us. Although the main demand comes in the form of electrical energy for the biomedical sector by utilizing thermal energy...
Enabling unidirectional thermal conduction of wood-supported phase change material for photo-to-thermal energy conversion and heat regulation
Abstract: Phase change materials (PCMs) enable passive thermal management by minimizing energy waste. However, a limitation of organic PCMs is their low thermal conductivity, which leads to...
Pickering emulsion of cellulose nanofibrils stabilized phase change materials for thermal management applications
Abstract: Phase change materials (PCM) has been increasingly used over the past decades to combat the large amount of energy needed for thermal comfort of human beings. Organic PCM is desired in...
Ceramic Precursor-Phthalonitrile Hybrid with Improved High Heat Resistance through Constructing Binary Continuous Phases
Abstract: Achieving organic-inorganic hybrids with improved heat resistance above 500 oC using inorganic materials as filler remains a challenge because inorganic constitutes could not form...
Cation–π interaction assisted facile preparation of graphene,epoxy nanocomposites with superior strength and toughness
Abstract: High-performance graphene/epoxy nanocomposites are desired in many fields. However, the performance of graphene/epoxy nanocomposites is far from the actual demand, and many methods reported...