Trident™ Application Highlight: Thermal Conductivity of Pressure-Sensitive Adhesives for EV Systems
This document highlights the use of the C-Therm's Transient Plane Source (TPS) Thin Films Utility to characterize thin acrylic pressure-sensitive adhesive films for EV battery module thermal...
Trident™ Application Highlight: Specific Heat Capacity Characterization of Battery Cells Using the TPS Cp Utility
This document highlights the use of the Transient Plane Source (TPS) Cp Utility for non-destructive measurement of specific heat capacity (Cp) in lithium-ion pouch and cylindrical battery...
Trident™ Thermal Conductivity Application Highlight: Characterization of a Battery Pouch’s Anisotropic Thermal Conductivity
This Application Highlight illustrates C-Therm’s FLEX Transient Plane Source (TPS) system being utilized to investigate the anisotropic thermal conductivities of a lithium pouch battery cell using...
Trident™ Thermal Conductivity Application Highlight: Measuring the Through-Plane Thermal Conductivity of Gas Diffusion Layers
The following Application Highlight addresses the through-plane thermal conductivity measurement of two gas diffusion layer membranes on the C-Therm Trident FLEX Thin Films Module.
Understanding the...
Trident™ Application Highlight: In-Line Thermal Effusivity Monitoring for Adhesive Dispensing Systems
This document highlights the integration of the Modified Transient Plane Source (MTPS) as an inline sensor for real-time monitoring of filler stability and material homogeneity in thermal adhesive...
Heat transfer in phase change materials for integrated batteries and power electronics systems
An integrated batteries and power electronics system has great potential in improving the compactness, flexibility and multifunctionality in electrical vehicles. However, it needs to overcome thermal...
Trident™ Application Highlight: Accelerated Performance Validation of Thermal Adhesives for EV Battery Packs
This document highlights the use of the Modified Transient Plane Source (MTPS) method in the measurement of uncured and cured thermal interface materials during R&D formulation development.
HB...
Trident™ Application Highlight: Thermal Conductivity of Self-Adhesive Tapes for EV Applications Using MTPS
The following Application Highlight addresses the measurement of self-adhesive tapes using the Modified Transient Plane Source (MTPS) method in collaboration with tesa tapes.
Pressure sensitive...
Effect of graphite fin on heat transfer enhancement of rectangular shell and tube latent heat storage
Abstract: Graphite is a promising material for application in thermal storage systems owing to its high thermal conductivity and extreme lightweight. In the current study, research on rectangular...