Trident™ Thermal Conductivity Application Highlight: Measuring Polymer Melts Under High-Pressure Conditions
This Application Highlight addresses the use of C-Therm's novel HT-TLS300 sensor for testing polymer melts under varying pressure conditions up to 3000 psi.
Polymer melts are widely used in various...
Trident™ Thermal Conductivity Application Highlight: Thermal Conductivity of Metal Hydrides in Hydrogen Pressure
This Application Highlight illustrates C-Therm’s unique capabilities in characterizing metal hydrides using a combination of C-Therm’s high-pressure cell designs and transient thermal...
Trident™ Thermal Conductivity Application Highlight: High Temperature Testing of Rock Wool Insulation
This application highlights addresses the measurement of rock wool insulation at elevated temperautes (up to 600ºC) using the Transient Plane Source (TPS) method.
Insulation is a material type used...
Trident™ Thermal Conductivity Application Highlight: Pyrolytic Graphite Foils and TPS
The following application highlight addresses the in-plane thermal conductivity of the Pyrolytic Graphite Foils (900-1800 W/mK), characterized using the C-Therm TPS Module with the Slab...
Properties of Cementitious Mortar and Concrete Containing Micro-Encapsulated Phase Change Materials
More efficient energy usage in buildings with increased thermal mass and better thermal insulation has attracted considerable attention in recent years. As one the most widely used construction...
Comparison of Phase Change Materials of Modified Soy Wax using Graphene and MAXene for Thermal Energy Storage Materials in Buildings
This study aimed to characterize Phase Change Materials (PCM) by improving their properties using shape stabilization; this was achieved by adding nanoparticles as a support material. PCM soy wax was...
Water-resistant gum-based phase change composite for thermo-regulating insulation packaging
The world's current energy crisis calls for green energy solutions that can preserve energy while incorporating renewable. As such, we have developed a leakage-proof phase change material (PCM)...
Trident™ Thermal Conductivity Tech Tip: Measuring Anisotropic Samples Using Flex TPS Sensor
The following Tech Tip addresses the measurement of polymeric anisotropic using the Flex Transient Plane Source (TPS) sensor and the Anisotropic Utility available on Trident.
Anisotropy is the...
Trident™ Thermal Conductivity Application Highlight: Potting and Impregnation Materials
The following Application Highlight addresses the measurement of materials used for potting and impregnation applications using the Modified Transient Plane Source (MTPS) method.
Potting and...