PolymersBelow is an example of a thermal expansion report produced by Thermal Analysis Labs.
The full example report can be downloaded through the form below.
For more...
Tech Library
Polymers
Search the Tech Library by keyword or browse a specific category below.
Additive Manufacturing
Aerogel
Application Highlight
Automotive
Battery
Bio-Based Insulation
Blending
Brochure
Building Materials
Ceramics
Composites
Dielectric
Effusivity
Electronics
Emissivity
Energy Storage
Explosives
Fiber/Fibre
Flex Transient Plane Source
Foams
Geology
Graphene
Heat Transfer Fluids
Insulation
Liquids
Metals
Modified Transient Plane Source (MTPS) Method
Nanomaterials
Oil and Gas
Optics
Paste
Phase Change Materials
Photovoltaic
Plastics
Polymers
Potting Compounds
Powders
Semiconductor
TAL
Textiles
Thermal Conductivity
Thermal Interface Materials
Thermal Management Systems
Thermal Radiation
Thermoelectrics
Thin Films
Transient Line Source (TLS) Method
Example TPS Thin Films Test Report
Trident™ Thermal Conductivity Application Highlight: Measuring Polymer Melts Under High-Pressure Conditions
This Application Highlight addresses the use of C-Therm's novel HT-TLS300 sensor for testing polymer melts under varying pressure conditions up to 3000 psi.
Polymer melts are widely used in various...
Application of Thermal Effusivity Sensors for Process Monitoring in Adhesives Dispensing
The following Application Highlight addresses the in-line integration of Modified Transient Plane Source (MTPS) sensors for use in monitoring filler stability of feedstock materials in measuring...
Trident™ Thermal Conductivity Application Highlight: Measuring Thermal Properties Under Cryogenic Conditions
The following Application Highlight features the use of the FLEX Transient Plane Source method in thermal conductivity testing under cryogenic conditions.
One of the most common variables...
Trident™ Thermal Conductivity Application Highlight: Testing Polymer Melts Using the TLS-HT300 Needle Probe
The following Application Highlight features the use of the Transient Line Source (TLS) method in the thermal conductivity testing of polymer at elevated temperatures.
In recent years, the...
Example TMA Test Report Thin Films
Below is an example of a thermal expansion report produced by Thermal Analysis Labs.
The full example report can be downloaded through the form below.
For more details on...
Trident™ Thermal Conductivity Application Highlight: Thermal Mapping and Filler Settling Detection in Polymer Composites With MTPS
The following Application Highlight features the use of the Modified Transient Plane Source method as a qualitative screening tool for the detection of filler dispersion uniformity in polymer...
Trident™ Thermal Conductivity Application Highlight: Monitoring Resin Stability and Sedimentation with MTPS
The following Application Highlight summarizes the use of C-Therm’s MTPS method in monitoring the stability of a filled resin system.
Thermally conductive adhesives are a key component for...
Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand
Abstract: Polyvinyl chloride plastic (PVC) and glass waste have proven to be significant environmental concerns considering their restricted reuse and complicated recycling procedures. Glass and PVC...