Trident™ Thermal Conductivity Application Highlight: Thermal Interface Materials Under Compression
The thermal conductivity of silicone and non-silicone thermal interface materials (TIMs) under different compressed states was measured using the Transient Plane Source (TPS) method.
Thermal...
Trident™ Thermal Conductivity Application Highlight: Testing the Thermal Conductivity and Effusivity of Condoms
The following Application Highlight addresses the measurement of condoms using the Modified Transient Plane Source (MTPS) and FLEX Transient Plane Source (TPS) methods.
Thermal conductivity and...
Rock thermal conductivity and thermal inertia measurements under martian atmospheric pressures
The physical properties of rocks on planetary surfaces influence their bulk thermal conductivity (k) and thermal inertia (TI); however, there has been little work done to date to explore quantitative...
Trident™ Thermal Conductivity Application Highlight: Measuring the Through-Plane Thermal Conductivity of Gas Diffusion Layers
The following Application Highlight addresses the through-plane thermal conductivity measurement of two gas diffusion layer membranes on the C-Therm Trident FLEX Thin Films Module.
Understanding the...
Trident™ Thermal Conductivity Application Highlight: Thermal Interface Materials Under Compression
The thermal conductivities of silicone and non-silicone thermal interface materials (TIMs) under different compressed states were measured using the Transient Plane Source
(TPS) method. Compression...
Trident™ Thermal Conductivity Application Highlight: 60 mm TPS Sensor Recommended for Testing Large Heterogenous Concrete Samples
This Application Highlight addresses the testing of concrete using the C-Therm Trident™. This document highlights the benefits of testing heterogeneous samples with the 60mm TPS.
Concrete is...
Trident™ Thermal Conductivity Application Highlight: Thermal Conductivity of Metal Hydrides in Hydrogen Pressure
This Application Highlight illustrates C-Therm’s unique capabilities in characterizing metal hydrides using a combination of C-Therm’s high-pressure cell designs and transient thermal...
Trident™ Thermal Conductivity Application Highlight: High Temperature Testing of Rock Wool Insulation
This application highlights addresses the measurement of rock wool insulation at elevated temperautes (up to 600ºC) using the Transient Plane Source (TPS) method.
Insulation is a material type used...
Trident™ Thermal Conductivity Tech Tip: Measuring Anisotropic Samples Using Flex TPS Sensor
The following Tech Tip addresses the measurement of polymeric anisotropic using the Flex Transient Plane Source (TPS) sensor and the Anisotropic Utility available on Trident.
Anisotropy is the...