Trident™ Application Highlight: Thermal Conductivity and Effusivity of Latex and Non-Latex Condoms
This document highlights the measurement of thermal conductivity and thermal effusivity of latex and non-latex condoms using the Transient Plane Source (TPS) Thin Films Utility and the Modified...
Rock thermal conductivity and thermal inertia measurements under martian atmospheric pressures
The physical properties of rocks on planetary surfaces influence their bulk thermal conductivity (k) and thermal inertia (TI); however, there has been little work done to date to explore quantitative...
Trident™ Thermal Conductivity Application Highlight: Measuring the Through-Plane Thermal Conductivity of Gas Diffusion Layers
The following Application Highlight addresses the through-plane thermal conductivity measurement of two gas diffusion layer membranes on the C-Therm Trident FLEX Thin Films Module.
Understanding the...
Trident™ Thermal Conductivity Application Highlight: Thermal Interface Materials Under Compression
The thermal conductivities of silicone and non-silicone thermal interface materials (TIMs) under different compressed states were measured using the Transient Plane Source
(TPS) method. Compression...
Trident™ Thermal Conductivity Application Highlight: 60 mm TPS Sensor Recommended for Testing Large Heterogenous Concrete Samples
This Application Highlight addresses the testing of concrete using the C-Therm Trident™. This document highlights the benefits of testing heterogeneous samples with the 60mm TPS.
Concrete is...
Trident™ Thermal Conductivity Application Highlight: Methods for Testing the Thermal Conductivity of Metal Hydrides Under High Pressure Hydrogen Gas
This Application Highlight illustrates why C-Therm’s Trident Thermal Conductivity Instrument provides the optimal capabilities in characterizing metal hydrides using a combination of C-Therm’s...
Trident™ Thermal Conductivity Application Highlight: High Temperature Testing of Rock Wool Insulation
This application highlights addresses the measurement of rock wool insulation at elevated temperautes (up to 600ºC) using the Transient Plane Source (TPS) method.
Insulation is a material type used...
Trident™ Thermal Conductivity Tech Tip: Measuring Anisotropic Samples Using Flex TPS Sensor
The following Tech Tip addresses the measurement of polymeric anisotropic using the Flex Transient Plane Source (TPS) sensor and the Anisotropic Utility available on Trident.
Anisotropy is the...
Trident™ Application Highlight: Thermal Conductivity of Polymeric Thin Films Using the TPS Thin Films Utility
This document highlights the use of the Transient Plane Source (TPS) method, via the Thin Films Utility, in the characterization of thermal conductivity of polymeric thin films.
Thin films are...