Analysis of Thermoelectric Energy Harvesting with Graphene Aerogel-Supported Form-Stable Phase Change Materials
Graphene aerogel-supported phase change material (PCM) composites sustain the initial solid state without any leakage problem when they are melted. The high portion of pure PCM in the composite can...
Reducing thermal contact resistance by a novel elastomeric polyethylene glycol/unsaturated polyester resin/graphene thermal interface materials
Reducing thermal contact resistance (TCR) is an important way to enhance heat dissipation of electronic devices. Elastomer is easy to deform, increase the contact area and reduce the TCR, but its...
Efficient storage and recovery of waste heat by phase change material embedded within additively manufactured grid heat exchangers
The low thermal conductivity of organic phase change materials (PCMs) hinders their usage for energy storage purposes. We demonstrate a compact PCM-based thermal battery that employs...
Preparation and characterization of capric-stearic acid/montmorillonite/graphene composite phase change material for thermal energy storage in buildings
A novel composite phase change material (PCM) of capric-stearic acid/montmorillonite (CA-SA/MMT) with thermal conductivity enhanced by graphene (GR) was prepared. It was characterized by FT-IR, XRD,...
Life cycle inventory and performance analysis of phase change materials for thermal energy storage
Solar energy is a renewable energy that requires a storage medium for effective usage. Phase change materials (PCMs) successfully store thermal energy from solar energy. The material-level life cycle...
Preparation of a Sustainable Shape-Stabilized Phase Change Material for Thermal Energy Storage Based on Mg²⁺-Doped CaCO₃/PEG Composites
The properties of polyethylene glycol-6000 (PEG)/MgCaCO₃, a low-cost shape-selective phase change material (ss-PCM), make it highly suitable for solar thermal applications. Nanosized porous...
Enhancement in thermo-electric energy harvesting efficiency by embedding PDMS in form-stable PCM composites
Graphene aerogel is widely utilized as a supporting material for latent heat thermal energy storage (LHTES) applications, since the three-dimensional (3D) interconnected structure can hold the...
Hybrid polyMOF Materials Prepared by Combining an Organic Polymer with a MOF and Their Application for Solar Thermal Energy Storage
The combination of metal−organic frameworks (MOFs), namely UiO-66, with polyethylene glycol (PEG) polymers yields hybrid polyMOF materials, which show unique morphology with tunable characteristics...
3D porous copper foam-based shape-stabilized composite phase change materials for high photothermal conversion, thermal conductivity and storage
Solar energy absorption and storage have attracted extensive attention and a number of potential phase change materials have been reported. In the current work, new shape-stabilized phase change...