Thermal Analysis of PCB by TMA
A printed circuit board or PCB is usually composed of epoxy resin with reinforced woven glass fibers where electrical components and conducting layers are mounted. The PCB board and the components...
Trident™ Application Highlight: Thermal Conductivity of Thermal Interface Materials Under Compression
This document highlights the use of the Transient Plane Source (TPS) method to characterize the thermal conductivity of silicone and non-silicone thermal interface materials (TIMs) under varying...
Trident™ Application Highlight: Thermal Conductivity and Effusivity of Latex and Non-Latex Condoms
This document highlights the measurement of thermal conductivity and thermal effusivity of latex and non-latex condoms using the Transient Plane Source (TPS) Thin Films Utility and the Modified...
Trident™ Thermal Conductivity Application Highlight: Measuring the Through-Plane Thermal Conductivity of Gas Diffusion Layers
The following Application Highlight addresses the through-plane thermal conductivity measurement of two gas diffusion layer membranes on the C-Therm Trident FLEX Thin Films Module.
Understanding the...
Trident™ Thermal Conductivity Application Highlight: Thermal Interface Materials Under Compression
The thermal conductivities of silicone and non-silicone thermal interface materials (TIMs) under different compressed states were measured using the Transient Plane Source
(TPS) method. Compression...
Trident™ Thermal Conductivity Application Highlight: 60 mm TPS Sensor Recommended for Testing Large Heterogenous Concrete Samples
This Application Highlight addresses the testing of concrete using the C-Therm Trident™. This document highlights the benefits of testing heterogeneous samples with the 60mm TPS.
Concrete is...
Trident™ Thermal Conductivity Application Highlight: Measuring Polymer Melts Under High-Pressure Conditions
This Application Highlight addresses the use of C-Therm's novel HT-TLS300 sensor for testing polymer melts under varying pressure conditions up to 3000 psi.
Polymer melts are widely used in various...
Trident™ Thermal Conductivity Application Highlight: Methods for Testing the Thermal Conductivity of Metal Hydrides Under High Pressure Hydrogen Gas
This Application Highlight illustrates why C-Therm’s Trident Thermal Conductivity Instrument provides the optimal capabilities in characterizing metal hydrides using a combination of C-Therm’s...
Trident™ Thermal Conductivity Application Highlight: High Temperature Testing of Rock Wool Insulation
This application highlights addresses the measurement of rock wool insulation at elevated temperautes (up to 600ºC) using the Transient Plane Source (TPS) method.
Insulation is a material type used...