![Powder blend](https://ctherm.com/wp-content/uploads/2020/07/Screen-Shot-2020-07-08-at-2.47.15-PM-300x196.png)
Figure 1. MTPS sensors can be applied in testing powder blend uniformity.
C-Therm’s MTPS thermal effusivity method can be applied in the testing of powders for blend uniformity monitoring.
![](https://ctherm.com/wp-content/uploads/2020/07/Screen-Shot-2020-07-08-at-2.57.38-PM-300x75.png)
Figure 2. Blending behavior can be unknown (left), stable (middle), or sensitive (right). Unerstanding of blending behavior is critical for good-quality test results.
C-Therms MTPS method can be integrated into blenders can be applied in-line or at-line for blend uniformity testing in generation of feedstocks. By placing multiple sensors in different positions, thermophysical uniformity of the blend can be assured.
![](https://ctherm.com/wp-content/uploads/2020/07/Screen-Shot-2020-07-09-at-10.45.54-AM-300x145.png)
Figure 3. Thermal effusivity in identifying regions of stable blend and de-mixing.
As seen in the image above, C-Therm’s MTPS sensors enable easy identification of regions of stable blend properties and de-mixing following over-blending.