Method selection is the most important decision you will make towards obtaining accurate, representative thermal conductivity data. In this session, we’ll be reviewing the following methods and their recommended applications:
Steady State Methods:
- Guarded Hot Plate | ASTM C177, ISO 8302
- Heat Flow Meter | ASTM C518, ISO 8301
- Thermal Interface Material (TIM) Tester |ASTM D5470
Transient Methods:
- Modified Transient Plane Source (MTPS) | ASTM D7984
- Transient Plane Source (TPS) | ISO 22007-2 and GB/T 32064
- Transient Line Source (TLS) | ASTM D5334 and D5930
- Transient Hot Wire (THW) | ISO 22007-4
Other Methods:
- Single Sided TPS ISO | 22007-7
- Laser Flash Analysis LFA | ASTM E1461
- Frequency-Domain Thermoreflectance / Time-Domain Thermoreflectance (FDTR/TDTR)
- 3-Omega
Whether you’re in R&D, quality control, or academic research, this session will help you make informed decisions about your thermal conductivity testing.
Join us on November 25, 2025 and discover how to select the best method for your thermal conductivity testing needs.
This webinar aired on November 25, 2025 2:00 pm GMT-4.
Submit the form below to access the webinar video:
Watch here: