English
English
Russian
French
Chinese
Spanish

Tech Library

Nano

Search the Tech Library by keyword or browse a specific category below.

Enhanced thermally conductive and thermomechanical properties of polymethyl methacrylate (PMMA)/graphene nanoplatelets (GNPs) nanocomposites for radiator of electronic components
In this work, multi-layer hot pressing (MLHP) method was used to prepare the graphene nanoplatelets (GNPs) filled polymethyl methacrylate (PMMA) composites. Effect of GNP content on the viscoelastic...
Stability and thermo-physical properties of green bio-glycol based TiO₂-SiO₂ nanofluids
The investigation on thermal properties of nanoparticles dispersed in the mixture of water and green Bio-glycol are limited in the literature and only available for single nanofluids. The purpose of...
Natural rubber nanocomposites: effect of carbon black/multi-walled carbon nanotubes hybrid fillers on the mechanical properties and thermal conductivity
This work presents the effect of carbon black (CB)/multiwall carbon nanotubes (MWCNT) hybridfiller system on the mechanical properties and thermal conductivity of natural rubber (NR) based...
Micro-Macroscopic coupled modeling for the prediction of synergistic improvement on the thermal conductivity of boron nitride and multi-walled carbon nanotube reinforced composites
The use of hybrid fillers consisting of phycochemically different nanoparticles has been widely investigated to realize synergistic improvement of thermal conduction behaviors. The enhancement of...
Effect of Carbon Nanotubes (CNTs) aspect ratio on the rheology, thermal conductivity and mechanical performance of Portland cement paste
Carbon nanotubes (CNTs) are potential candidates to enhance the heat balance of concrete, reducing internal stresses caused by differential heating in massive concrete elements. The higher the aspect...
Efficient degradation of tetracycline by RGO@black titanium dioxide nanofluid via enhanced catalysis and photothermal conversion
The applications of photocatalytic pollutant degradation have remained limited due to the low efficiency of solar energy utilization. In this study, a photothermal catalyst consisting of reduced...
Functional Nanocellulose Aerogels for Varying Technological Applications
Nanocellulose is a renewable and biocompatible nanomaterial with a high strength, low density, and tunable surface chemistry. Since a lot of hydroxyl groups are present on the surface of the...
Core@double‐shell structured multifunctional phase change microcapsules based on modified graphene oxide Pickering emulsion
New multifunctional phase change microcapsules with paraffin (Pn) as core and GO and lead tungstate (PbWO4) as double‐shell were designed by modified GO Pickering emulsion, and the effect of GO...
Silver nanoparticle-based Tween 80 green cutting fluid (AgNP-GCF) assisted MQL machining – An attempt towards eco-friendly machining
In modern research, the instigation of eco-friendly and sustainable manufacturing options have drawn a great attention and become a global interest. Thus, usage of environmental pleasant cutting...